The most recent description for how to connect our devices through CAN-BUS can be found on our E-Learning-Center Learnbox under
https://www.learnboxes.com/learnboxes/2015#_
Please register with Seccua Service upfront, so you are set up for access of the Seccua E-Learning center.
A brief summary can be downloaded here.
Comments
3 comments
I added a document describing how to remove the 120 Ohm resistor from the CAN connector if necessary.
Florian, 20th March 2012
Does the 120 ohm resistor have to be removed from all Virex Pro units?
The resistor has to be removed from all units connected to our CAN-wire-harness.
Florian, 16th April 2012
Article is closed for comments.